UHF CB Radio 477 MHz Vehicle Bull Bar Mount Mobile Antennas, high 8.1 dBi gain
Model ZN3-77-12 Super Heavy Duty, 2.1 metre
The ZN3-77-12 super heavy duty UHF CB radio antenna is specifically designed for mounting to a vehicle bull bar. Standing 2.1 metres tall and offering high 8.1 dBi gain, this antenna will deliver maximum range over flat ground.
Manufactured in Australia by ZCG Scalar, the high quality design is built to last. Key features include :
- The top whip is detachable for storage when not required, or is interchangeable with the shorter 6.6 dBi gain ZN3-77-11 top whip or the highly flexible 2.1 dBi ZN3-77-04-TP "Quick Fit" top.
- A precision machined marine grade aluminium ferrule prevents water and dust ingress giving the antenna a longer service life.
- The machined aluminum radome cap stops water and dust ingress into the radome.
- Component parts are available to order separately.
Factory tuned for 477 MHz and suitable for all Uniden, GME, Icom and Vertex UHF CB radios, the antenna is available with either a White or Black fibreglass radome. The heavy duty stainless steel barrel spring base bolts into any bracket with a minimium 12.7 mm (½") diameter hole.
4.5 metres of RG58 low loss stranded cable bottom exits through the mounting base. The cable is not terminated to allow easy installation through vehicle firewalls and dashboards. It is recommended that the cable be cut to the shortest length necessary prior to fitting the UHF male solder connector supplied.
ZN3-77-04-TP Highly Flexible "Quick Fit" UHF CB Substitute Mobile Antenna Top, 2.1 dBi
For owners of our large high gain ZN3 bull bar mount 477 MHz UHF CB antennas, ZN3-77-04-TP is the perfect substitute antenna top.
When travelling into bush areas where a tall antenna might be subject to damage, or in city areas where high gain is not necessary, then simply interchange your antenna top with this convenient 40 cm “Quick Fit” 2.1 dBi model.
- The UHF male connector inside the base fits directly onto any of the spring bases supplied with our ZN3-77-12, ZN3-77-11 or ZN3-77-10 bull bar mount 477 MHz UHF CB radio antennas.
- The black delrin and UV stabilised PVC antenna top is highly flexible and virtually unbreakable. It will survive hard knocks and the the roughest treatment.
- The antenna is a small size for easy storage inside your vehicle, inexpensive and offers adequate performance with 2.1 dBi gain.
- The “Quick Fit” interchange of antenna tops takes less than a minute !
- The antenna comes factory tuned for 477 MHz UHF CB radio. Simply fit and use.
Model TCMA675 Max Gain, 2.2 metre
The TCMA675 UHF CB radio antenna offers 8.1 dBi gain, providing the maximum reception range available in a vehicle mounted UHF CB antenna. At 2.2 metres tall, the antenna is designed to mount to a vehicle bull bar only.
Suitable for all Uniden, GME, Icom and Vertex UHF CB radios, the high quality components and construction ensures a long service life even in the harsh Australian environment.
Available with either a white or pink fibreglass radome, the mount ferrule is chrome plated brass with a heavy duty stainless steel parallel spring.
The antenna can be firmly secured into any bull bar bracket with 12.7 mm (½") minimum diameter hole using the bolt and spring washer provided. If required, the BBM-SS stainless steel bull bar bracket is available to order separately.
5 metres of RG58 low loss stranded cable side exits from the mount ferrule and is not terminated to allow easy installation through vehicle firewalls and dashboards.
It is recommended that the cable be cut to the shortest length necessary prior to fitting the UHF male solder connector supplied.
This UHF CB radio antenna is identical in appearance to :
- TC1600A, NEXT G Cellular Mobile Phone
- TC1600D, GSM Cellular Mobile Phone
- TC1100, AM/FM Radio Receive
