Highly Flexible UHF CB Radio 477 MHz Mobile Antennas

GRN Series, 4 dBi gain

Just 33 cm tall, the GRN half wave UHF CB radio antennas feature a highly flexible PVC top which is virtually unbreakable.

Perfect for rugged off-road driving, forklifts and tractors, these ground independent mobile antennas can be mounted in various positions and offer effective performance with 4 dBi gain.

Factory tuned for 477 MHz, the copper, brass, delrin and PVC construction is purpose built to survive harsh Australian conditions long term.

GRN480 is the most popular UHF CB antenna kit consisting of :

1. The detachable GRN480TP “Quick Fit” antenna top,
2. RA4.7 right-angle UHF female base fitted with 4.7 metres of RG58 low loss stranded cable, and
3. UHF male solder connector supplied.

The right-angle UHF female mounting base fits into any bracket with 17 mm minimum diameter hole making this UHF CB antenna kit perfect for mounting in various positions on a vehicle or to a truck mirror. This unique design makes installation so simple with the additional benefit of being able to easily remove the antenna when not required, or in a situation where you are concerned about damage, vandalism or theft.

GRN480TP is the “Quick Fit” antenna top alone with UHF male connector inside the base. Since mounting arrangements differ, this option allows you to select mounting accessories separately according to your requirements.

GRNFC480 is the fixed cable model. 4.7 metres of RG58 low loss stranded cable bottom exits through the mounting base. The cable is fixed, so this option is ideal when a detachable antenna top is not desireable. Secure the antenna into any bracket with minimum 10 mm diameter hole using the nut and washer on the threaded base.

Model ZN1-77-02, 2.1 dBi gain

ZN1-77-02 is a highly flexible low profile half wave UHF CB antenna ideally suited to mounting on the vehicle guard, the boot of a sedan, a truck mirror, forklift or tractor.

Virtually unbreakable and factory tuned for 477 MHz with 2.1 dBi gain, this model is truly ground independent offering numerous mounting locations.

Standing 400 mm tall and suitable for all Uniden, GME, Icom and Vertex UHF CB radios, the ZN1-77-02 antenna is designed to be both lightweight and durable with a long service life.

The antenna mounts simply into any bracket with a minimium 10 mm diameter hole using the nut and washer on the threaded base.

4.5 metres of RG58 low loss stranded cable bottom exits through the mounting base. The cable is not terminated to allow easy installation through vehicle firewalls and dashboards.

It is recommended that the cable be cut to the shortest length necessary prior to fitting the UHF male solder connector supplied.