Corner Reflector Base Station Antennas, 148 to 520 MHz
When you require good gain together with a high front-to-back ratio, a Corner Reflector will provide the ideal base station antenna solution.
A corner reflector can be mounted either horizontal or vertical as required. An open grid construction is used for low wind loading.
- Model RA3 is for use in the VHF frequency range 148 to 174 MHz and delivers 7.5 dBd gain. Specify any 7.5 MHz bandwidth and your corner reflector will be manufactured and tuned accordingly at better than 1.5:1 VSWR.
- Model RA4 delivers 10 dBd gain and can cover any 20 MHz bandwidth you nominate within the UHF frequency range 400 to 520 MHz.
Both RA3 and RA4 models are simple to assemble with the dipole mounting position clearly indicated with a red adhesive band.
An N-Female connector rated for up to 500 watts input power is located at the base of the dipole.
Two U-Bolts are supplied for mounting to a round mast between 20 mm and 50 mm in diameter.
