-
Base Station Antennas
- ANTENNA SUMMARY
- Collinear
- Coaxial Dipole
- Sidemount Dipole
- Stack Dipole Array
- UHF Binary Dipole Array
- Broadband Discone
- Corner Reflector
- Monocone
- HF Broadband 3-Wire
- AM/FM Radio Receive
- Yagi Y100, 40-69 MHz
- Yagi Y200, 70-108 MHz
- Yagi Y300, 100-250 MHz
- Yagi Y400, 380-700 MHz
- Yagi Y409 Broadband UHF
- Cross Polarised Y406CP
- Yagi Y800, 700-960 MHz
- Yagi 1710-2170 MHz
- Log Periodic Yagi
- Yagi Rear Screens
- Yagi Support Strut Kits
-
Air Band Antennas
-
Mobile Antennas
- ANTENNA SUMMARY
- VHF Tuneable Tip BFB1
- VHF Field Tune GRL-T
- VHF Field Tune GRH
- VHF Low Profile CT160
- VHF Whips, 70-174 MHz
- VHF and UHF On-Glass
- UHF Elevated Feed GID
- UHF Quick Fit GID
- UHF Stainless Steel
- UHF Highly Flexible GRN
- UHF Low Profile CT400
- UHF Whips, 400-520 MHz
- Scanning Receive Whip
- GPS, 1575.42 MHz
- Brackets for Vehicles
- Mobile Antenna Springs
- Cable Ties & Tape
- SWR and Power Meters
-
AM/FM Radio Receive
-
Cellular Mobile Phone
-
Wireless Data Link
CFD890 Spread Spectrum Stud Mount Data Link Dipole Antenna, 853 to 929 MHz
The CFD890 spread spectrum data link dipole antenna is factory tuned to cover the full frequency range 853 to 929 MHz at less than 1.5:1 VSWR with 2.1 dBi gain.
40 cm tall, the dipole can be secured into any bracket with a 12.7 mm (½") minimum diameter hole using the stainless steel nut and washer at the base.
Construction consists of welded brass internals, aluminium ferrule and a black fibreglass radome.
No metal ground plane is necessary for the antenna to operate effectively. Potential mount positions therefore include vehicles and numerous fixed locations where no metal exists. A variety of mounting brackets are available separately.
3 metres of RG58 low loss cable side exits from the mount ferrule. An SMA Male connector is fitted to the cable. Other connectors are available upon request.
Head Office, Lindenow, Victoria, Australia