AM/FM Radio Marine Antennas for the best reception while at sea
B20G-N-AMFM Mast Mount Antenna
The B20G-N-AMFM antenna for AM/FM radio can be mounted to a mast using two parallel clamps. Alternatively, nylon side mounts are available to suit any flat vertical surface.
The white fibreglass tapered radome and stainless steel mount tube stands 3.4 metres tall.
An N-female connector is located at the base of the mount tube.
All components used in construction are of the highest quality to ensure the antenna will survive in the harshest environment for many years.
The B20G-N mast mount model for VHF 156 to 162 MHz is identical in appearance.
Mounting clamps, feeder cable, connectors, cable ties and tape are available separately to complete the installation.
AM80 and B20G/D-AMFM Deck Mount Antennas
These marine deck mount antennas are a single piece construction and match the height and appearance of other models in the ZCG Scalar marine range.
- AM80 stands 2.2 metres tall.
- B20G/D-AMFM is taller at 2.8 metres.
These antennas contain a tuned section to provide strong resonance at 100 MHz to pull in the normally weaker FM radio signals.
All components used are of the highest quality to ensure long term survival in the harsh marine environment. These antennas will deliver reliable performance for many years.
4.5 metres of RG58 low loss stranded cable side exits from the chromed brass ferrule. Cut the cable to the shortest length necessary prior to fitting the solderless car radio connector supplied.
The MM1 folding deck mount supplied as standard is constructed from toughened plastic. This base folds down in two directions and also swivels in the opposite plane by loosening the stainless steel pivot bolt. This versatility allows the antenna to be mounted in a variety of positions on any flat surface and at any angle using four screws or bolts.
For those who prefer the ultimate in quality, durability and strength, the MM2 folding deck mount is constructed entirely from stainless steel. To order either antenna with the stainless steel MM2 deck mount, simply add the letters ‘SS’ to the Order Code.
MA1100 Deck Mount AM/FM Radio Receive Antenna, 90 cm
Standing 90 cm tall, the MA1100 marine deck mount antenna will significantly improve your AM and FM radio reception while at sea. No metal ground plane is necessary for effective performance.
The versatile MM1 folding swivel deck mount base supplied makes the MA1100 model a perfect choice for mounting to both recreational and commercial vessels alike on any flat surface and at any angle desired using four screws or bolts.
The antenna can be folded down flat while not in use.
5 metres of RG58 low loss stranded cable side exits from the mount ferrule. A solderless "easy fit" car radio connector is supplied.
This MA1100 model is identical in appearance to the MADB Multiband NEXT G and GSM Mobile Phone antenna.
For those who prefer the ultimate in quality, durability and strength, the antenna is also available with the MM2 folding deck mount which is constructed entirely from stainless steel. The order code is MA1100SS.
BM6-AM/FM and BM8-AM/FM Base Model Deck Mount Antennas
These Base Model AM/FM Radio deck mount antennas are a perfect match in both height and appearance to other ZCG Scalar “BM” series marine antennas.
- BM6-AM/FM stands 1.8 metres tall.
- BM8-AM/FM is 2.45 metres tall.
The single piece white fibreglass radome is fully sealed to protect the copper internals ensuring long term survival in the harsh marine environment. The antennas are optimised in the factory for strong resonance across both the AM and FM radio frequencies.
4.5 metres of RG58 low loss stranded cable side exits from the folding base. A solderless "easy fit" car radio connector is supplied.
The MM1 folding deck mount supplied is constructed from toughened plastic. Mount these antennas on any flat surface and at any angle using four screws or bolts.
The antenna must be in a vertical position for the optimum radio reception and can be folded down flat when not required.
