UHF Marine Radio Antennas, 400 to 520 MHz - Mast Mount, Deck Mount

Marine Mast Mount Collinear Antenna Model CLU3SS, 5.1 dBi gain

1.7 metres tall with 5.1 dBi gain, the CLU3SS marine mast mount collinear antenna can be manufactured to cover any 1.5% bandwidth you specify within the UHF frequency range 400 to 520 MHz.

The antenna is constructed from stainless steel and fibreglass to ensure long term survival in the harsh marine environment and will deliver reliable performance for many years.

The N-Female connector located at the base of the mount tube is rated for up to 100 watts input power.

Mast mounting clamps, feeder cable, connectors, cable ties and tape are available separately to complete the installation.

Marine Deck Mount Antenna Models MA675 and MA400, 8.1 dBi gain

UHF Marine Folding Deck Mount Antenna Models MA675 and MA400 both stand 2.2 metres tall These ground independent UHF marine deck mount antennas are a single piece construction and stand 2.2 metres tall, identical to other models in the marine range. The internal radiator is copper and the end fed half wave design provides excellent performance with 8.1 dBi gain.

MA675 is factory tuned for 477 MHz UHF CB Radio communications. This model is held in stock.
MA400 can be manufactured to cover any 1.5% bandwidth you specify within the UHF frequency range 400 to 520 MHz.

4.5 metres of RG58 stranded cable side exits from the chromed brass ferrule. Cut the cable to the shortest length necessary prior to fitting the UHF Male solder connector supplied.

All components used are of the highest quality to ensure long term survival in the harsh marine environment. These antennas will deliver reliable performance for many years.

The MM1 folding deck mount supplied as standard is constructed from toughened plastic. This base folds down in two directions and also swivels in the opposite plane by loosening the stainless steel pivot bolt. This versatility allows the antenna to be mounted in a variety of positions on any flat surface and at any angle using four screws or bolts.

For those who prefer the ultimate in quality, durability and strength, the MM2 folding deck mount is constructed entirely from stainless steel. To order either antenna with the stainless steel MM2 deck mount, simply add the letters ‘SS’ to the Order Code.