AM/FM Radio Receive Bull Bar Mount Mobile Antennas : SG1100 series, 90 cm

Standing 90 cm tall, the SG1100 mobile antenna is designed to mount to a vehicle bull bar and will significantly improve your AM and FM radio reception.

The SG1100 mobile AM/FM car radio bull bar mount antenna stands 90 cm tall

The antenna mounts into any bracket with 12.7 mm minimum diameter hole

Manufactured from the finest quality components, the robust antenna design is purpose built to survive harsh Australian conditions long term.

SG1100B has a Black fibreglass radome.
SG1100W has a White radome.

Secure the antenna firmly into any bracket with a 12.7 mm (½”) minimum diameter hole using the bolt and washer provided. The high quality electro-polished stainless steel barrel spring dampens vibrations while travelling. An Easy Fit solderless car radio connector is supplied

5 metres of RG58 low loss stranded cable side exits from the aluminium mount ferrule. An “easy fit” solderless car radio connector is supplied.

This SG1100 antenna is identical in appearance to :

SGDB : Multiband NEXT G and GSM Mobile Phone.
SG477 : 477 MHz UHF CB Radio.

SG1100-TPM antenna tops (no spring)

The SG1100B-TPM black and SG1100W-TPM white antenna tops alone without any barrel spring are available to order separately. These antenna tops can be used to replace a damaged radome, or to mount in fixed locations and used as an AM/FM radio receive base station antenna.

The antenna top can be mounted to a bracket, or to a mast, in the following manner :

There are two ways to mount the SG1100-TPM antenna top outdoors

Route the 5 metre RG58 cable inside and connect to your AM/FM radio receiver.

Other AM/FM radio receive base station antenna options are listed here »