Brackets and Springs for mounting mobile antennas to vehicles

This selection of brackets are available to mount a mobile antenna in various positions on a car, truck or four wheel drive vehicle. Each bracket has a 17 mm diameter hole through which the antenna is secured.

GM1

“L” bracket for Vehicle Guard

1.6 mm stainless steel

2 drilled holes for screws

Also suit facia board

GM2

“Z” bracket for Vehicle Guard

1.6 mm stainless steel

2 drilled holes for screws

1 drilled hole for bolt

BRM-SS

Bracket for Vehicle
Bull Bar

50 mm diameter tube max

All stainless steel

Includes U-bolts, nuts, washers

MRM-SS

Bracket for Vehicle
Mirror

20 mm diameter tube max

All stainless steel

Includes bolts, nuts, washers

TLM

Bracket for Vehicle
Boot or Bonnet

All stainless steel

Rubber feet to protect painted surface, includes Allen Key to tighten in position

Bracket for Vehicle Guttering

All stainless steel

Includes screws and plate clamp

A spring dampens vehicle vibrations while travelling and reduces stress upon antenna components. These springs are available to order separately.

1570

The 1570 spring will suit GIDM90T

The 1570 stainless steel spring is available as another mounting option for the GIDM90T cellular mobile phone antenna.

The pre-drilled bolt and washer included allows feeder cable to pass through the centre of the spring and exit through the bolt.

50 mm tall x 20 mm diameter.

M10 thread both ends.

1269

The 1269 spring as supplied with SGDB

A heavy duty and high quality stainless steel beehive spring, the 1269 has been successfully used on our popular SGDB antennas for decades.

Includes a ½” bolt and spring washer.

105 mm tall x 45 mm diameter.

½" x 12 BSW thread both ends.

1270

The 1270 spring as supplied with TC1600

Our strongest most rigid heavy duty steel barrel spring, the 1270 is ideal for vehicle mounting very tall antennas such as the 2.2 metre Max-Gain TC1600 models.

Highly recommended when usual driving conditions are very rough.

Includes a ½" bolt and spring washer. 105 mm tall x 35 mm diameter.

½” x 12 BSW thread both ends.