Vehicle Bull Bar Mount Cellular Mobile Phone Antennas - NEXT G, GSM and 3G
The bull bar of a car, four wheel drive or truck is an ideal position to mount the heavier, more robust or tall high gain cellular mobile phone antennas.
- For NEXT G and GSM cellular mobile phone network coverage, models SGDB and TC1600 are recommended for mounting to your vehicle bull bar.
- For the 3G network, the SGL2000 model with 6.2 dBi gain will be your ideal solution.
TC1600 Series MAX GAIN NEXT G or GSM Mobile Phone Antennas, 8.1 dBi
With 8.1 dBi gain, these TC1600 models offer the maximum gain and reception range practical in a broadband vehicle mounted cellular mobile phone antenna.
- Model TC1600A is tuned for the NEXT G network.
- Model TC1600D is for the GSM network.
Available with either a white or pink fibreglass radome, the antenna stands 2.2 metres tall and, for a vehicle, the Bull Bar is the mounting position recommended. Due to size, mounting to the vehicle guard, boot or mirror is not practical.
Matched internally by a unique transforming printed circuit board, these antennas are ground independent and do not require any metal ground plane to operate effectively. The antenna is firmly secured into any 12.7 mm (½") minimum diameter hole using the bolt and spring washer provided. If required, the BBM-SS stainless steel bull bar bracket is available to order separately.
5 metres of RG58 low loss cable side-exits from the chromed brass ferrule. An FME female crimp connector is fitted to the cable.
This TC1600 model antenna is identical in appearance to :
Model SGDB Super Gain Multiband NEXT G and GSM Mobile Phone Antenna, 6.2 dBi
The SGDB cellular mobile phone antenna is a popular choice for good reason :
- Multiband coverage of both NEXT G and GSM networks combined.
- Effective performance with 6.2 dBi gain.
- Ground independent; no metal ground plane is necessary.
- Modest size at 90 cm tall.
- Robust construction ensuring a long service life.
The fibreglass radome is available in 3 colours; Black, White or Brown.
Secure the antenna firmly into any bracket with a 12.7 mm (½”) minimum diameter hole using the bolt and washer provided. The high quality electro-polished stainless steel beehive spring dampens vibrations while travelling.
5 metres of RG58 low loss cable side exits from the aluminium mount ferrule. An FME Female connector is fitted to the cable.
This SGDB model antenna is identical in appearance to :
SGL2000 Super Gain Light Design 3G Cellular Mobile Phone Antenna, 6.2 dBi
This model SGL2000 antenna is factory tuned for the 3G cellular mobile phone network operating in the frequency range 1920 to 2170 MHz. With 6.2 dBi gain, the antenna will deliver consistent and dependable results with maximum efficiency, particularly where signal strength is marginal.
The high quality stainless steel spring and fibreglass radome stands 48 cm tall. The fibreglass radome is available in either Black or White. Specify your preference when ordering. A Brown radome can be supplied, but is built to order.
The antenna mounts into any 16 mm hole and is secured firmly by the threaded stud and nut assembly at the base. A range of brackets are available to suit various mounting positions such as your vehicle bull bar, guard, boot or truck mirror. The antenna can also be mounted in locations other than on a vehicle. No metal ground plane is necessary for the antenna to operate effectively.
5 metres of RG58 low loss cable bottom exits through the base and may be cut shorter if required. An FME female crimp connector is supplied.