Vehicle Guard, Boot and Mirror Mount Cellular Mobile Phone Antennas
The NEXT G, GSM and 3G cellular mobile phone antennas listed here are all of a modest size and weight and have been specifically designed by ZCG Scalar for mounting to a vehicle guard, the boot of a sedan or to a truck mirror using the appropriate bracket.
SGLDB Multiband Light Design NEXT G and GSM Mobile Phone Antenna, 6.2 dBi
Standing 75 cm tall with 6.2 dBi gain, this SGLDB model is the ideal light weight multiband antenna solution to cover both the NEXT G and GSM cellular mobile phone networks combined.
The antenna mounts easily into any bracket with a 16 mm minimum diameter hole and is secured firmly by the nut and washer in the base. No metal ground plane is necessary for the antenna to operate effectively. The electro-polished stainless steel barrel spring dampens vibrations while travelling.
5 metres of RG58 low loss cable bottom exits through the spring and mount ferrule. An FME Female connector is fitted to the cable.
GIDM90T Series NEXT G or GSM Cellular Mobile Phone Antennas, 5.1 dBi
GIDM90T ground independent cellular mobile phone antennas are a modest size and deliver excellent perfomance with 5.1 dBi gain. Just 45 cm tall, select either the NEXT G or the GSM model.
Both are a rugged design with detachable stainless steel black powder coated whip. They mount simply into any 10mm minimum diameter hole using the nut and spring washer at the base.
Typically the antenna is mounted to a vehicle guard, boot or truck mirror using the appropriate bracket. However they can also be mounted in any fixed location, not just on a vehicle. No metal ground plane is necessary for the antenna to operate effectively.
4.5 metres of RG58 low loss cable bottom exits through the base. An FME female connector is fitted to the cable.
GIDM-DB Multiband NEXT G and GSM Cellular Mobile Phone Antenna, 2.1 dBi
Key features of this model GIDM-DB antenna are :
- Multiband coverage of both NEXT G and GSM cellular mobile phone networks combined.
- Small size at just 27 cm tall.
- 2.1 dBi gain.
- Ground independent.
- Easily mounted to a vehicle guard, boot, truck mirror or any fixed location using the appropriate bracket.
The antenna is firmly secured into any 10 mm hole using the threaded stud and nut assembly at the base.
5 metres of RG58 low loss cable bottom exits through the base. The cable may be cut shorter if desired. An FME Female connector is supplied.
SGL2000 Super Gain Light Design 3G Cellular Mobile Phone Antenna, 6.2 dBi
This model SGL2000 antenna is factory tuned for the 3G cellular mobile phone network operating in the frequency range 1920 to 2170 MHz. With 6.2 dBi gain, the antenna will deliver consistent and dependable results with maximum efficiency, particularly where signal strength is marginal.
The high quality stainless steel spring and fibreglass radome stands 48 cm tall. The fibreglass radome is available in either Black or White. Specify your preference when ordering. A Brown radome can be supplied, but is built to order.
The antenna mounts into any 16 mm hole and is secured firmly by the threaded stud and nut assembly at the base. A range of brackets are available to suit various mounting positions such as your vehicle bull bar, guard, boot or truck mirror. The antenna can also be mounted in locations other than on a vehicle. No metal ground plane is necessary for the antenna to operate effectively.
5 metres of RG58 low loss cable bottom exits through the base and may be cut shorter if required. An FME female crimp connector is supplied.