Vehicle On-Glass Mount Cellular Mobile Phone Antennas
|
Small and unobtrusive, an On-Glass cellular mobile phone antenna is a popular alternative to other bracket mounted antennas. |
The modern adhesive pads used have immense gripping strength, so much so that great care needs to be taken when removing the antenna for reinstallation on another vehicle. |
OG835 has an external whip standing 30 cm tall. Factory tuned to cover both NEXT G and GSM cellular mobile phone networks combined, the antenna delivers 5.1 dBi gain. |
The model OGI-08-4 antenna sticks to the inside of a vehicle windscreen and will improve cellular mobile phone reception and transmission range while travelling. |
With performance comparable to an external on-glass mount whip, this antenna offers multiband coverage of all the cellular mobile phone networks operating around Australia; NEXT G, GSM and 3G combined. |
Installation has never been simpler; just peel and press the adhesive pad to the inside of the screen, route the cable and connect to the car kit. No bracket, no holes, no screws ! The antenna is secure inside your vehicle. |
It is important to avoid mounting an on-glass antenna anywhere near heated demister elements or on any area of glass which contains metal flakes. |
OG835
On-Glass Vehicle Mount Multiband
NEXT G and GSM
Cellular Mobile Phone Antenna
|
|
| • |
Covers both NEXT G and GSM networks combined |
| • |
5.1 dBi gain |
| • |
30 cm tall, black removeable whip |
| • |
External pivoting base with adhesive pad |
| • |
Internal coupling box with FME Male connector and adhesive pad |
| • |
Alcohol wipes to clean and prepare glass |
| • |
4 metres of RG58 low loss cable with FME female connectors fitted each end |
| • |
Mini-UHF Male crimp connector also supplied |
|
|
|
OGI-08-4
On-Glass Inside Vehicle Mount
Multiband NEXT G, GSM and 3G
Cellular Mobile Phone Antenna
|
|
• |
Covers all the cellular mobile phone networks operating around Australia;
NEXT G, GSM and 3G combined |
• |
2.1 dBi gain, comparable performance to an external on-glass mount whip |
• |
Small and inconspicuous |
• |
Simple installation, no bracket, no holes, no screws. Just peel and press the adhesive pad to the inside of the front or rear screen, route the cable and connect to the car kit. |
• |
The antenna is secure inside your vehicle. No external parts means the possibility of damage and vandalism are minimised and the car wash no longer a worry ! |
• |
115 mm long x 21 mm wide x 7 mm thick |
• |
Alcohol wipe to clean and prepare glass |
• |
3 metres of RG174 cable with SMA Male connector fitted |
• |
FME Female to SMA Male Adaptor also supplied |
|
|
|
|
